VMWareを新しいバージョンに入れ替えました。
評価ライセンスでしばらく動作確認して問題なければ、購入する予定
米国のサイトからダウンロードしてきましたが、ローカライズされているらしく、メニューもメッセージも全て日本語で表示されますね。
以前の仮想マシン全て引き継がれていました。
以下VMWare Toolsのインストールログです。
インストールに問題は、ありませんでしたがネットワークが止まってしまったので/etc/init.d/network startで起動しました。
$ sudo ./vmware-install.pl Creating a new VMware Tools installer database using the tar4 format. Installing VMware Tools. In which directory do you want to install the binary files? [/usr/bin] /usr/local/bin What is the directory that contains the init directories (rc0.d/ to rc6.d/)? [/etc] What is the directory that contains the init scripts? [/etc/init.d] In which directory do you want to install the daemon files? [/usr/local/sbin] In which directory do you want to install the library files? [/usr/local/lib/vmware-tools] The path "/usr/local/lib/vmware-tools" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] In which directory do you want to install the documentation files? [/usr/local/doc/vmware-tools] The path "/usr/local/doc/vmware-tools" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] The installation of VMware Tools 6.0.1 build-55017 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "/usr/local/bin/vmware-uninstall-tools.pl". Before running VMware Tools for the first time, you need to configure it by invoking the following command: "/usr/local/bin/vmware-config-tools.pl". Do you want this program to invoke the command for you now? [yes] Stopping VMware Tools services in the virtual machine: Guest operating system daemon: done Trying to find a suitable vmmemctl module for your running kernel. None of the pre-built vmmemctl modules for VMware Tools is suitable for your running kernel. Do you want this program to try to build the vmmemctl module for your system (you need to have a C compiler installed on your system)? [yes] Using compiler "/usr/bin/gcc". Use environment variable CC to override. What is the location of the directory of C header files that match your running kernel? [/lib/modules/2.6.20-16-generic/build/include] Extracting the sources of the vmmemctl module. Building the vmmemctl module. Using 2.6.x kernel build system. make: ディレクトリ `/tmp/vmware-config0/vmmemctl-only' に入ります make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります CC [M] /tmp/vmware-config0/vmmemctl-only/os.o SHIPPED /tmp/vmware-config0/vmmemctl-only/vmmemctl1.o LD [M] /tmp/vmware-config0/vmmemctl-only/vmmemctl.o Building modules, stage 2. MODPOST 1 modules WARNING: could not find /tmp/vmware-config0/vmmemctl-only/.vmmemctl1.o.cmd for /tmp/vmware-config0/vmmemctl-only/vmmemctl1.o CC /tmp/vmware-config0/vmmemctl-only/vmmemctl.mod.o LD [M] /tmp/vmware-config0/vmmemctl-only/vmmemctl.ko make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます cp -f vmmemctl.ko ./../vmmemctl.o make: ディレクトリ `/tmp/vmware-config0/vmmemctl-only' から出ます The module loads perfectly in the running kernel. Trying to find a suitable vmhgfs module for your running kernel. None of the pre-built vmhgfs modules for VMware Tools is suitable for your running kernel. Do you want this program to try to build the vmhgfs module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmhgfs module. Building the vmhgfs module. Using 2.6.x kernel build system. make: ディレクトリ `/tmp/vmware-config0/vmhgfs-only' に入ります make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります CC [M] /tmp/vmware-config0/vmhgfs-only/backdoor.o CC [M] /tmp/vmware-config0/vmhgfs-only/backdoorGcc32.o CC [M] /tmp/vmware-config0/vmhgfs-only/bdhandler.o CC [M] /tmp/vmware-config0/vmhgfs-only/cpName.o CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLinux.o CC [M] /tmp/vmware-config0/vmhgfs-only/cpNameLite.o CC [M] /tmp/vmware-config0/vmhgfs-only/dbllnklst.o CC [M] /tmp/vmware-config0/vmhgfs-only/dentry.o CC [M] /tmp/vmware-config0/vmhgfs-only/dir.o CC [M] /tmp/vmware-config0/vmhgfs-only/eventManager.o CC [M] /tmp/vmware-config0/vmhgfs-only/file.o CC [M] /tmp/vmware-config0/vmhgfs-only/filesystem.o CC [M] /tmp/vmware-config0/vmhgfs-only/fsutil.o CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsBd.o CC [M] /tmp/vmware-config0/vmhgfs-only/hgfsUtil.o CC [M] /tmp/vmware-config0/vmhgfs-only/inode.o CC [M] /tmp/vmware-config0/vmhgfs-only/kernelStubsLinux.o CC [M] /tmp/vmware-config0/vmhgfs-only/link.o CC [M] /tmp/vmware-config0/vmhgfs-only/message.o CC [M] /tmp/vmware-config0/vmhgfs-only/module.o CC [M] /tmp/vmware-config0/vmhgfs-only/page.o CC [M] /tmp/vmware-config0/vmhgfs-only/request.o CC [M] /tmp/vmware-config0/vmhgfs-only/rpcin.o CC [M] /tmp/vmware-config0/vmhgfs-only/rpcout.o CC [M] /tmp/vmware-config0/vmhgfs-only/staticEscape.o CC [M] /tmp/vmware-config0/vmhgfs-only/stubs.o CC [M] /tmp/vmware-config0/vmhgfs-only/super.o LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vmhgfs-only/vmhgfs.mod.o LD [M] /tmp/vmware-config0/vmhgfs-only/vmhgfs.ko make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます cp -f vmhgfs.ko ./../vmhgfs.o make: ディレクトリ `/tmp/vmware-config0/vmhgfs-only' から出ます The module loads perfectly in the running kernel. pcnet32 34052 0 Unloading pcnet32 module Trying to find a suitable vmxnet module for your running kernel. None of the pre-built vmxnet modules for VMware Tools is suitable for your running kernel. Do you want this program to try to build the vmxnet module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmxnet module. Building the vmxnet module. Using 2.6.x kernel build system. make: ディレクトリ `/tmp/vmware-config0/vmxnet-only' に入ります make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります CC [M] /tmp/vmware-config0/vmxnet-only/vmxnet.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vmxnet-only/vmxnet.mod.o LD [M] /tmp/vmware-config0/vmxnet-only/vmxnet.ko make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます cp -f vmxnet.ko ./../vmxnet.o make: ディレクトリ `/tmp/vmware-config0/vmxnet-only' から出ます The module loads perfectly in the running kernel. update-initramfs: Generating /boot/initrd.img-2.6.20-16-generic update-initramfs: Generating /boot/initrd.img-2.6.20-15-generic Trying to find a suitable vmblock module for your running kernel. None of the pre-built vmblock modules for VMware Tools is suitable for your running kernel. Do you want this program to try to build the vmblock module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmblock module. Building the vmblock module. Using 2.6.x kernel build system. make: ディレクトリ `/tmp/vmware-config0/vmblock-only' に入ります make -C /lib/modules/2.6.20-16-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' に入ります CC [M] /tmp/vmware-config0/vmblock-only/linux/block.o CC [M] /tmp/vmware-config0/vmblock-only/linux/control.o CC [M] /tmp/vmware-config0/vmblock-only/linux/dbllnklst.o CC [M] /tmp/vmware-config0/vmblock-only/linux/dentry.o CC [M] /tmp/vmware-config0/vmblock-only/linux/file.o CC [M] /tmp/vmware-config0/vmblock-only/linux/filesystem.o CC [M] /tmp/vmware-config0/vmblock-only/linux/inode.o CC [M] /tmp/vmware-config0/vmblock-only/linux/module.o CC [M] /tmp/vmware-config0/vmblock-only/linux/stubs.o CC [M] /tmp/vmware-config0/vmblock-only/linux/super.o LD [M] /tmp/vmware-config0/vmblock-only/vmblock.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vmblock-only/vmblock.mod.o LD [M] /tmp/vmware-config0/vmblock-only/vmblock.ko make[1]: ディレクトリ `/usr/src/linux-headers-2.6.20-16-generic' から出ます cp -f vmblock.ko ./../vmblock.o make: ディレクトリ `/tmp/vmware-config0/vmblock-only' から出ます The module loads perfectly in the running kernel. [EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service provides a new communication capability with the Host, primarily for development at the moment. Would you like to enable this feature? [no] Detected X.org version 7.2. Please choose one of the following display sizes that X will start with (1 - 15): [1] "640x480" [2] "800x600" [3]< "1024x768" [4] "1152x864" [5] "1280x800" [6] "1152x900" [7] "1280x1024" [8] "1376x1032" [9] "1400x900" [10] "1400x1050" [11] "1440x900" [12] "1680x1050" [13] "1600x1200" [14] "1920x1200" [15] "2364x1773" Please enter a number between 1 and 15: [3] 5 X Window System Version 7.2.0 Release Date: 22 January 2007 X Protocol Version 11, Revision 0, Release 7.2 Build Operating System: Linux Ubuntu Current Operating System: Linux ubuntuvm10 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686 Build Date: 04 April 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (++) Log file: "/tmp/vmware-config0/XF86ConfigLog.7008", Time: Thu Sep 20 23:12:52 2007 (++) Using config file: "/tmp/vmware-config0/XF86Config.7008" (EE) Failed to load module "void" (module does not exist, 0) X is running fine with the new config file. (EE) AIGLX: Screen 0 is not DRI capable (EE) No Input driver matching `void' (EE) xf86OpenSerial: Cannot open device /dev/input/wacom No such file or directory. Error opening /dev/input/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/input/wacom No such file or directory. Error opening /dev/input/wacom : Success (EE) xf86OpenSerial: Cannot open device /dev/input/wacom No such file or directory. Error opening /dev/input/wacom : Success Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list! Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list! FreeFontPath: FPE "/usr/share/fonts/X11/misc" refcount is 2, should be 1; fixing. Starting VMware Tools services in the virtual machine: Switching to guest configuration: done Guest filesystem driver: done Mounting HGFS shares: failed Guest memory manager: done Guest vmxnet fast network device: done Blocking file system: done DMA setup: done Guest operating system daemon: done /etc/init.d/vmware-tools: 1050: vmware-guestd: not found The configuration of VMware Tools 6.0.1 build-55017 for Linux for this running kernel completed successfully. You must restart your X session before any mouse or graphics changes take effect. You can now run VMware Tools by invoking the following command: "/usr/local/bin/vmware-toolbox" during an X server session. To use the vmxnet driver, restart networking using the following commands: /etc/init.d/networking stop rmmod pcnet32 rmmod vmxnet modprobe vmxnet /etc/init.d/networking start To make use of the virtual printer, you will need to restart the CUPS service Enjoy, --the VMware team $