hddtempコマンドでハードディスクの温度を確認できます。
$ sudo aptitude install hddtemp $ sudo hddtemp /dev/sda /dev/sda: Hitachi HDP725050GLA360: 36°C $
lm-sensorsを試してみましたが、こちらは、うまくいきませんでした。
$ sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. $
sensors-detectを実行してみましたがうまくいきませんでした。（残念）
$ sudo sensors-detect # sensors-detect revision 5249 (2008-05-11 22:56:25 +0200) This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. Do you want to probe now? (YES/no): Probing for PCI bus adapters... Sorry, no supported PCI bus adapters found. If you have undetectable or unsupported I2C/SMBus adapters, you can have them scanned by manually loading the modules before running this script. We are now going to do the I2C/SMBus adapter probings. Some chips may be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. Next adapter: mv64xxx_i2c adapter (i2c-0) Do you want to scan it? (YES/no/selectively): Some chips are also accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... セグメンテーション違反です $